Laminate Flooring Installation Tips

Laminate Flooring Installation Tips
7 Min Read

If you are looking for Carpet Flooring & Flooring Installation Services, consider hiring Healthy Home Flooring for all your needs.

If you've never installed laminate flooring, it can be confusing. There are a couple of different methods for installing it, but the general idea is to use the Slide and click method to ensure a flush installation. You should also make sure to install spacers along any doors or where the laminate meets another material. Finally, you should install base molding. This step can be time-consuming, but if all else fails, you can always remove it and start over.

Slide and Click Method

You can easily install laminate flooring with the Slide and Click method. The tongue and groove of each plank will lock together, ensuring that the laminate remains intact. This method is particularly effective for difficult areas. This type of flooring requires no glue and can be installed over almost any surface. To install laminate flooring using this method, you should ensure that the floor is level. To do so, place a block of wood on the outer laminate and lightly tap it with a soft rubber mallet.

Laminate Flooring Installation Tips

First, install the tongue-and-groove boards. If the boards are too thick, use 1/4-inch spacers. You can also stagger the row. If the remaining space between two adjacent rows is narrower than the adjacent boards, trim the boards accordingly. Once the first row is in place, install the second row of planks, resting the last plank a quarter-inch away from the wall.

Glue Method

There are several differences between installing laminate floors using the glue or click method. The glue method involves installing laminate flooring directly to the subfloor. The glue is not as likely to cause the floor to rise as the click method. However, the glue method can be time-consuming. After laying down the flooring, you should carefully clean the adhesive spills with Bostik Ultimate Adhesive Remover Towels.

Laminate Flooring Installation Tips

Floating floors are not firmly attached to the subfloor, which makes them unstable. A heavy piece of furniture pushed across the surface could cause it to lift. Glue down installation holds up better in high-traffic areas. It also allows furniture and carts to roll across the floor without causing damage. Glue down floors also protect against scratches and denting, making them the best choice for homes with children and pets.

Planks along each side wall to be 2 1/2 " wide

Measure the width of planks along each side wall. The first row should be equal in width to the last row. You need to leave about 3/8-inch gaps along both sides. Then, measure the width of the next row and cut it accordingly. Then, you can start installing the floor. You'll notice that the wall gaps are exactly the same width as the first row.

Avoiding Bulging, Gaping, and Spreading

You may have experienced bulging, gaping, or spreading of your laminate flooring in the past. If you're in the same boat, there are some things you can do to avoid this problem. This is mainly a matter of moisture. Excessive moisture will make your laminate planks expand and contract, causing the gaps. If you notice this, follow these simple tips to fix the issue.

Laminate Flooring Installation Tips

First, check the moisture content of your subfloor. If it's not moist, it may affect the laminate floorboards. The lack of moisture barrier in the subfloor and direct water damage can cause bubbling. It can also cause your laminate floorboards to change width. To avoid this problem, you should check the moisture level of the subfloor and the locking system before installing the new floor. If you notice large bubbles in your laminate flooring, you should replace it with a high-quality brand.

Choosing the Right Underlayment

The underlayment you choose for your laminate flooring installation can make a huge difference in the sound transmission and the R-value of the floor. The first step in selecting the right underlay is to assess the subfloor. Many older homes have concrete subfloors, which are solid but porous. The underlayment you choose for a concrete subfloor should act as a solid barrier against moisture and provide good acoustics.

Laminate Flooring Installation Tips

Depending on the room you're installing the laminate flooring in, a thicker, more dense underlayment can help with the sound insulation. Moreover, you can choose between a lightweight or heavy underlayment that is compatible with both the type of flooring and the room's insulation needs. Depending on your budget, you can opt for a basic laminate underlayment that is low-cost and high-quality. You can also opt for a thicker, 2.75mm underlayment, such as the one made by Duralay. Considering the amount of traffic the floor will receive, choose a product that has a moisture barrier and is ADA compliant.