DIY Roofing Repair 101 |What Tips You Should Know

4.2
 DIY Roofing Repair 101 |What Tips You Should Know

While most of the major roofing jobs should be left to the professionals, you might want to do some of the roof repairs yourself to save money. Some small roofing jobs shouldn’t be a problem as long as you’re confident in your skills and aren’t afraid of heights. Here are some tips to kick you off.

1. Know when to call the roofing service

Roofing damages aren’t all clear-cut affairs with obvious solutions. A lot of thought and experience is required to undertake every repair successfully, so carefully diagnose a problem before starting. With all the tornadoes, hailstones and storms in Texas, even simple damaged or missing shingles may be disguising a major problem that requires professional help. Whenever you’re uncertain about the full extent of the problem, call a roofing service in Texas for a free professional inspection before you start your DIY project.

2. Focus on safety

The first thing to know about roofing work – it isn’t safe. Your safety should therefore be your main priority, particularly when performing repairs that require you to be on the roof. Wear all the necessary safety gear including a safety harness and rubber soled shoes for better grip. Also make sure you clear debris and other safety hazards from your roof before you start. Lastly, don’t forget to be mindful of the weather. Doing any roofing work when it’s windy, rainy or snowy is an extremely bad idea.

3. Locating a leak source

The most common sign of damage to a roof is leaking. Whenever your roof leaks, don’t just ignore it as it will always get worse. Water doesn’t even have to reach the floor, any water stains on the ceiling are a red flag. Locating the source of the leak is the first step towards fixing the problem. Go to the roof or use a binoculars to check for any missing, curled or damaged shingles. Keep in mind that a leak will also occur at points where shingles meet or where flashing and caulking have been damaged in areas with gaps (around chimneys or skylights). Also check your chimney for loose debris. Once you find the cause, you can:

• Replace damaged or missing shingles – to remove a damages shingle, raise the edges of the surrounding shingles then remove its nails. Slide it out then place in the new shingle and align it with the rest. You should then fasten it using galvanized roofing nails.

• Straighten curled shingles – once you notice a curled shingle, hold down its edges then apply an adhesive agent like asphalt roofing cement to keep it straight.

• Reseal flashing – if you find gaps in the flashing around the chimney, skylights or similar areas, use a caulking gun or roofing cement to seal the leak.

These tips should help you get the job done easily enough. You just have to take care not to bite off more than you can chew. Major projects like roof replacements should be left to the professionals; not only to keep you safe but to ensure the results are up to standard.